P/N 96-160M65 160-Position, 0.0256 [0.65] Pitch QFP-to-PGA Adapter
FEATURES * Convert surface-mount QFP packages to a 15x15 PGA footprint. * Reduce costs by using less-expensive QFP packages to replace PGA footprints in existing designs. * Pins are mechanically fastened and soldered to board using Aries patented process, creating a reliable electrical connection and rugged contact. * Consult factory for Panelized Form or for mounting of consigned chips. GENERAL SPECIFICATIONS * ADAPTER BODY: FR-4 with 1-oz. Cu traces * PADS: finished with ENIG (Immersion Au over Electroless Ni) * PINS: Brass 360 1/2-hard per UNS C36000, ASTM B16/B16M * PIN PLATING: is 200 [5.08] Sn/Pb 93/7 per ASTM B579-73 over 100 [2.54] Ni per SAE AMS-QQ-N-290 * OPERATING TEMPERATURE: 221F [105C] MOUNTING CONSIDERATIONS
CUSTOMIZATION: In addition to the standard products shown on this page, Aries specializes in custom design and production. Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the right to change product general specifications without notice.
* SUGGESTED PCB HOLE SIZE: 0.028 0.003 [0.71 0.08] dia. * Will plug into standard PGA socket
ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: 0.005 [0.13] UNLESS OTHERWISE SPECIFIED ROW-TO-ROW 0.003 [0.08] PIN-TO-PIN 0.003 [0.08] NON-CUMULATIVE CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS
ORDERING INFORMATION
P/N 96-160M65 QFP-to-PGA 15x15 Adaptor P/N 96-160M65-P QFP-to-PGA 15x15 Panilized Form P/N 160-PGM15043-30 QFP-to-PGA 15x15 Wire Wrap
Bristol, PA 19007-6810 USA TEL (215) 781-9956 * FAX (215) 781-9845 WWW.ARIESELEC.COM * INFO@ARIESELEC.COM
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
18020 Rev. AA
|
